Solar (photovoltaic) modules converts sunlight into electricity which can be used immediately or stored in a battery.
Double Glass Encapsulated Amorphous Solar Panel
Mono-crystalline & Multi-crystalline Solar Module
|The charge controller (charge regulator) monitors the battery's charge state and should have logic control to know when and how much to charge the batteries. It must also be able to change the charge voltage, depending on the temperature of the battery.|
The same logic circuit will also protect the battery from discharging, below its lowest acceptable voltage, to prevent damage by over discharge. The charge controller also protects against wrong connection of the battery and reverse voltage to the panel.
Deep Cycle Maintenance Free Batteries
The battery's main function is to store the power generated by the solar modules during the day to be used during the night. The type of battery used is Deep Cycle (Lead Acid) Maintenance Free type. This battery is designed to be fully charged and discharged over and over again without causing damage.
|DC-AC inverters are used to convert Direct Current (DC) from the battery into Alternating Current (AC) to run AC appliances. Types of inverters available are Grid Interactive Inverters, Standalone Inverters and Bi-directional Inverters.|
12V DC Energy Saving Lamp
A normal incandescent light bulb loses 90% of the power you put into it, in the form of heat (just touch a light bulb and see how hot it is). The cost of your solar energy system will depend considerably on the average energy consumption of your load. An important factor for all solar energy systems is the low energy consumption of these lamps compared to other light sources with the same brightness. These lamps also have an average life span of 10 years which is higher than an ordinary lamp.